There are numerous methods with which picture frames may be hung. There's also a large number of aesthetic considerations with regards to where and in what formation to hang them. Another consideration is lighting, if you're interested in showcasing a piece (or more) of artwork once they're on the wall. Here, the focus will be on the hardware for hanging your art.
Fittings and Fixtures To Use
More often than not when you want to hang a picture on your wall you will be using a combination hooks and wire, with the wire or some picture cord tied between the hooks on the back of your wooden picture frame. Additionally, you'll need a hook in the wall to hold your artwork from that's secure and rated for the appropriate amount of weight.
If the frame is small to mediium sized, then use small screw eyes, or you can use screw rings, that is a screw eye that features a ring attached to it. For medium to heavy large picture frames, D-rings must be used and screwed to the frame.
If you have particularly heavy frames, then you can use glass plates to hang them. Glass plates are screwed on the back of the frame and into the wall and they'll show from the front of your frame.
It is important to take into consideration the kind of wall that the picture will be hung on – drywall, stucco, concrete, etc.
Most of the time it's going to be sufficient to match an X hook or a double X hook for the weight of the frame that you are going to hang. If a wall is solid, you then should be able to use the nails that come furnished with the X hooks, since they are quite strong and will have the capacity to penetrate your solid walls, but if your wall isn't solid then you'll need to use a wall anchor. Should this be the way it is, makes use of the double X hook and screw in the middle of the hook through the heart shaped hole.
A picture rail is another option. If you want to keep your walls from getting a large amount of holes, then you can purchase specially designed rail hooks and hang up the artwork from your picture rail. All you've got to accomplish is attach your cord, chain, or picture wire on the back of your picture frame.
Deciding on Cord or Wire
In most cases, you'll need to use picture cord or picture wire to hold your frames. Both are strong, so one isn't necessarily better than the other. The biggest difference between the two is the fact that when you attach the wire screw barrel for plastic injection mold machine to the back of the frame, you wrap it around itself to secure it whilst the cord has to be tied with a reef knot. So if you're not too good with knots, go for using the picture wire. Chain can also be an alternative to cord or wire, but is not as frequently used.
The Way The Fittings Need To Be Attached
The first thing that you should do is to measure one quarter of the way down either side of the frame (from the top) and make a pencil mark. Create a small pilot hole at these points, making sure they aren't too near to the border. If the wood extruder screw and barrel of your picture frame is uneven or sloped, be sure you make the hole into the thickest portion of the wood. https://www.batten-machinery.com/product/single-extrusion-screw-barrel/ One great tip which will help make this process easier could be putting a little bit of soap or candle wax onto the thread of your screw eye or screw. Doing this may prevent the screw eyes/rings from weakening as well as breaking by lubricating them; just rub the screw on a bar of soap or perhaps a candle and you're ready to go. Just twist the rings into place.
If you work with picture wire, cut for yourself a length which is twice the distance between the eyes or rings. Loop the wire from the hangings with equal amounts of excess on each side, then double loop the wire through the picture hanging and wrap it around itself toward the center of the frame. Be sure not to make the wire too tight, because you need a little bit of slack so that the wire won't strain while hanging from the wall.
If you're using picture cord, cut a length of it about 8 inches longer than twice the length between the two hangers. Thread the cord through each hanging then tie a reef knot to secure the cord.
Now you know all the steps and tips for how to successfully hang your own picture frames.