Tips to Install 9th Gen Honda Accord Sedan HexaLight LED Fog Light
Today we're going to look at the foglights and we're going to be installing the 9012 LED bulbs on the Honda Accord fog lights. This is an H8 bulb type. By study on croccitymag web , you will have the ability to take care of your car by yourself. First, we're going to start by removing the black bezel, in order to eliminate this black bezel. Initially, you need to get rid of a screw from under the car. We just need to loosen it a couple turns, that method we can slide it out. There are 2 holes in the black piece plastic, this hole that's closest to the center of the automobile is where you're going to insert a screwdriver. You just require to loosen up a couple of rely on get it, so you can get the black bezel out. There's a hook shape and so you can get it to screw in there. What if you take your screwdriver will directly through a loop in, simply loosen it a couple turns and you'll be able to pop out the bezel. Next, after you've loosened the screw you might take a plastic tool or a butter knife wrapped with electrical tape, all you require to do is slip your tool under the space and get a puppy you're going to pull up. It will pop out when you get it loose, and then you're going to bring up and these clips will come out. Just 2 more screws that you have to get rid of, there's one of them listed below the real estate and the other one is a little bit deeper within simply need a Phillips screwdriver to take those 2 out. The assembly was out, there's the bulb there and after that all you require to do is unclip the bulb and after that twist the bulb counterclockwise to pull it out. Simply press on the tab and slide it out and here you twist it comes out. We're going to take the light headlight LED system and it sets up just the same way. Take the housing line up the three prongs, twist clockwise to lock it in place and ensure you push till the tab is protected and after that you just reverse the installation it can be a little difficult to get it to line up. Now that we've got it installed all you got to do is turn your headlights on and ensure the fog lights are on to check them out. https://croccitymag.com/