Stratview Research

Aircraft Brackets Market to Reach US$ 239.9 million in 2023

The Aircraft Brackets Market: Highlights

The Aircraft Brackets Market is projected to grow at a healthy rate over the next five years to reach US$ 239.9 million in 2023. Increasing global commercial and regional aircraft deliveries, increasing share of wide-body aircraft in the total commercial aircraft deliveries, rising commercial aircraft fleet size, increasing demand for lightweight brackets, and increasing demand for 3D-printed brackets are the major factors that are burgeoning the demand for brackets in the aircraft industry. North America and Europe are the biggest demand generators with a combined share of more than two-thirds of the total aircraft brackets market.

Aircraft Brackets Market – Insights by Aircraft Type:

The market is segmented into commercial aircraft, regional aircraft, general aviation, military aircraft, and helicopter. Commercial aircraft is likely to remain the most dominant and fastest-growing segment of the aircraft brackets market during the forecast period. Increasing production rates of key programs, such as B737 and A320 family, to support rising passenger traffic; market entry of new players, such as COMAC; and the introduction of fuel-efficient variants of existing aircraft programs, such as B737 max, A320neo, are the major factors driving the demand for brackets in the commercial aircraft segment.

Aircraft Brackets Market – Insights by Application Type:

The market is segmented into fuselage, wings, control surfaces, and others. Fuselage is likely to remain the most dominant segment of the aircraft brackets market during the forecast period. It is the biggest application in an aircraft and requires brackets in large quantities. For instance, there are several components and parts, such as airframe assembly, where brackets are used. Control surfaces are likely to be the fastest growing application segment during the same period.

Aircraft Brackets Market – Insights by Bracket Type:

The market is segmented into class A, class B, and class C. Class B brackets are likely to remain the most dominant and fastest growing segment of the aircraft brackets market during the forecast period. Class B brackets are removable and can be attached to class A brackets or directly to the structure. Further, there is also a huge demand for class B brackets at the aftermarket level, owing to the fact that they are replaced during periodic maintenance of aircraft in case of any damage.

Aircraft Brackets Market – Insights by Material Type:

The market is segmented into aluminum, steel, and others. Aluminum brackets are likely to remain the most dominant segment of the aircraft brackets market during the forecast period, driven by its high compatibility with aluminum parts, its non-ferrous properties, excellent strength-to-weight ratio, and high conductivity. Other materials which basically include composites and metal-alloys are also expected to witness healthy growth rates over the next five years, owing to an increasing penetration of composite materials in the aerospace industry and a growing acceptance of 3D printed brackets.

Aircraft Brackets Market – Insights by End-User Type:

The market is segmented into OE and aftermarket. OE sales are likely to remain the most dominant segment of the aircraft brackets market during the forecast period, driven by an increased production of commercial aircraft to meet rising passenger traffic across the globe. Aftermarket sales are expected to be the faster-growing segment during the forecast period, owing to increasing upgrade of existing aircraft fleet and periodic maintenance of active aircraft.

Aircraft Brackets Market – Insights by Region:

North America is projected to remain the largest market for aircraft brackets during the forecast period. The USA is the growth engine of the region’s market and has one of the largest fleets of commercial and military aircraft across the world. Presence of major OEMs, tire players, bracket manufacturers, and raw material suppliers are primarily driving the demand for brackets in the country. Asia-Pacific is expected to witness the highest growth in the aircraft brackets market during the same period, owing to an increasing presence of major aircraft OEMs in the region, market entry of new players, such as COMAC to mitigate the level of dependency on Boeing and Airbus, and increasing commercial aircraft fleet size to meet rising passenger traffic.

The supply chain of this market comprises raw material suppliers, bracket manufacturers, tier players, aircraft OEMs, airline companies, leasing companies, and MRO companies. The key aircraft bracket manufacturing companies are Triumph Group Inc., Arconic Inc., Premium Aerotec, Precision Castparts Corp., Tri-Mack Plastics Manufacturing Corporation, AIM Aerospace Inc., Daher Socata SAS, Denroy Plastics Ltd., Spirit Aerosystems Inc., and Stroco Manufacturing Inc. New product development and formation of long-term supply agreements are some of the most common strategies adopted by the major players in order to remain competitive in the market.

Source : https://www.stratviewresearch.com/377/Aircraft-Brackets-Market.html

Aircraft Brackets Market to Reach US$ 239.9 million in 2023

The Aircraft Brackets Market: Highlights

The Aircraft Brackets Market is projected to grow at a healthy rate over the next five years to reach US$ 239.9 million in 2023. Increasing global commercial and regional aircraft deliveries, increasing share of wide-body aircraft in the total commercial aircraft deliveries, rising commercial aircraft fleet size, increasing demand for lightweight brackets, and increasing demand for 3D-printed brackets are the major factors that are burgeoning the demand for brackets in the aircraft industry. North America and Europe are the biggest demand generators with a combined share of more than two-thirds of the total aircraft brackets market.

Aircraft Brackets Market – Insights by Aircraft Type:

The market is segmented into commercial aircraft, regional aircraft, general aviation, military aircraft, and helicopter. Commercial aircraft is likely to remain the most dominant and fastest-growing segment of the aircraft brackets market during the forecast period. Increasing production rates of key programs, such as B737 and A320 family, to support rising passenger traffic; market entry of new players, such as COMAC; and the introduction of fuel-efficient variants of existing aircraft programs, such as B737 max, A320neo, are the major factors driving the demand for brackets in the commercial aircraft segment.

Aircraft Brackets Market – Insights by Application Type:

The market is segmented into fuselage, wings, control surfaces, and others. Fuselage is likely to remain the most dominant segment of the aircraft brackets market during the forecast period. It is the biggest application in an aircraft and requires brackets in large quantities. For instance, there are several components and parts, such as airframe assembly, where brackets are used. Control surfaces are likely to be the fastest growing application segment during the same period.

Aircraft Brackets Market – Insights by Bracket Type:

The market is segmented into class A, class B, and class C. Class B brackets are likely to remain the most dominant and fastest growing segment of the aircraft brackets market during the forecast period. Class B brackets are removable and can be attached to class A brackets or directly to the structure. Further, there is also a huge demand for class B brackets at the aftermarket level, owing to the fact that they are replaced during periodic maintenance of aircraft in case of any damage.

Aircraft Brackets Market – Insights by Material Type:

The market is segmented into aluminum, steel, and others. Aluminum brackets are likely to remain the most dominant segment of the aircraft brackets market during the forecast period, driven by its high compatibility with aluminum parts, its non-ferrous properties, excellent strength-to-weight ratio, and high conductivity. Other materials which basically include composites and metal-alloys are also expected to witness healthy growth rates over the next five years, owing to an increasing penetration of composite materials in the aerospace industry and a growing acceptance of 3D printed brackets.

Aircraft Brackets Market – Insights by End-User Type:

The market is segmented into OE and aftermarket. OE sales are likely to remain the most dominant segment of the aircraft brackets market during the forecast period, driven by an increased production of commercial aircraft to meet rising passenger traffic across the globe. Aftermarket sales are expected to be the faster-growing segment during the forecast period, owing to increasing upgrade of existing aircraft fleet and periodic maintenance of active aircraft.

Aircraft Brackets Market – Insights by Region:

North America is projected to remain the largest market for aircraft brackets during the forecast period. The USA is the growth engine of the region’s market and has one of the largest fleets of commercial and military aircraft across the world. Presence of major OEMs, tire players, bracket manufacturers, and raw material suppliers are primarily driving the demand for brackets in the country. Asia-Pacific is expected to witness the highest growth in the aircraft brackets market during the same period, owing to an increasing presence of major aircraft OEMs in the region, market entry of new players, such as COMAC to mitigate the level of dependency on Boeing and Airbus, and increasing commercial aircraft fleet size to meet rising passenger traffic.

The supply chain of this market comprises raw material suppliers, bracket manufacturers, tier players, aircraft OEMs, airline companies, leasing companies, and MRO companies. The key aircraft bracket manufacturing companies are Triumph Group Inc., Arconic Inc., Premium Aerotec, Precision Castparts Corp., Tri-Mack Plastics Manufacturing Corporation, AIM Aerospace Inc., Daher Socata SAS, Denroy Plastics Ltd., Spirit Aerosystems Inc., and Stroco Manufacturing Inc. New product development and formation of long-term supply agreements are some of the most common strategies adopted by the major players in order to remain competitive in the market.

Source : https://www.stratviewresearch.com/377/Aircraft-Brackets-Market.html

Indian Rail Composites Market To Reach US$ 122.3 million in 2023

The Indian rail composites market is forecasted to grow at an impressive rate over the next five years to reach an estimated US$ 122.3 million in 2023. The Indian rail industry has undergone a remarkable transition over a period of time with regards to the adoption of composite materials in various applications. The rail industry is one of the largest consumers of composite materials in India and has efficaciously witnessed a continuous increase in the penetration of composites over the last ten years. The penetration of composites would not cede here and is likely to increase further with the development of new composite applications as well as to address changing customer demands with evolving trends, rapid transformations in technologies, and intense market competition. This will correspond to an attractive growth opportunity for both existing as well as new players.

However, the Indian rail industry currently lacks the presence of global composite part molders that have the capability to fabricate a large number of composite parts using advanced manufacturing processes. There is an immense requirement of such players that bring good composite technological capability in India and augment the overall composite capabilities for the Indian rail industry. Another restraint of the market is a relatively low awareness of the rail industry’s personnel about the benefits of composite materials over their rivals.

The burgeoning growth of the Indian rail composites market is primarily driven by an organic growth of the Indian rail industry. The Indian Ministry of Railways has been increasing investments in order to expand the existing rail network to support the rising passenger traffic. The government is also raising the production capacities of rail coaches to run additional trains on existing rail networks or on new networks. For instance; Integral Coach Factory (ICF) Chennai is likely to manufacture approximately 15,000 rail coaches in the next five years. At the same time, the government is also inaugurating the new rail coach plants in order to meet the incessantly rising demand. Similar efforts can also be recorded in the locomotive productions as well. Major Indian locomotive houses, such as Chittaranjan Locomotive Works, West Bengal, have registered an overall increase in the locomotive production over the past five years and are likely to maintain this momentum over the next five years as well.

Metro railcars are the new growth engines of the Indian rail industry. Highly congested tier-II cities of India demand a greater means of mass transportation that can efficiently resolve this challenge. Almost all the major cities have either ongoing or proposed plan for setting up metro rails. Expansion on existing metro rail projects in Delhi, Bengaluru, and Kolkata; and ongoing/upcoming metro rail projects in Nagpur, Kochi, Ahmedabad, Lucknow, Chennai, Hyderabad, and Navi Mumbai are some of the prominent examples of a long list, which are likely to create a huge demand for metro railcars in the foreseeable future. Composites are the perennial choice of materials for fabricating structural-to-semi-structural applications of metro railcars, such as front-end module and interior panels.

Additionally, the handsome growth of the Indian rail industry is catching the interest of many global players. Most of the major global players are targeting India as their new revenue pocket and are eagerly eyeing various upcoming rail projects in India. Some of them have already entered the Indian market by setting up their manufacturing plants in different parts of India. These players are not only targeting the huge potential of the growing Indian rail industry but also targeting export in neighboring countries. For instance; Bombardier and Alstom, the two global metro railcar giants, have set up their plants in India to capture the huge local potential as well as to target neighboring countries. A similar trend is also noticed in the locomotive market as well.

The second major factor driving the demand for composites is an incessant increase in its penetration. Composite materials are one of the most versatile materials that offer significant advantages as compared to their rivals including metals. Lightweight, high-strength-to-weight ratio and excellent corrosion and fatigue resistance are merely few benefits among many that composite materials bring to the table. There has been an incessant shift from traditional heavyweight parts to lightweight composite parts. Thirdly, the Indian Ministry of Railways has a plan to retrofit around 40,000 old rail coaches in the next five-and-a-half-years. Composites not only offer excellent mechanical and chemical properties but also augment overall aesthetics of rail coaches. Composites may play a pivotal role in modernizing these large old fleets.

Indian Rail Composites Market – Insights based on rail type:- The Indian rail composites market is segmented based on the rail type as Rail Coaches, Locomotives, and Metro Rails. The rail coaches segment currently dominates the market and is likely to maintain its growth momentum over the next five years as well, driven by increasing production of rail coaches, advancement in the rail coach design, upcoming rail coach factories in India, and increasing penetration of composites in structural to semi-structural applications. Metro railcars, another promising segment, is likely to grow at the highest rate in the market during the forecast period, driven by large ongoing and upcoming metro rail projects in different parts of India including Bengaluru, Hyderabad, Kochi, Lucknow, and Nagpur coupled with a greater composites penetration per railcar.

Indian Rail Composites Market – Insights based on composite type:- Based on the composite type, The Indian rail composites market is segmented into Polyester Composites, Phenolic Composites, and Others. Polyester composite is expected to remain the choice of composites in the market during the forecast period, driven by its low-cost advantage and good performance. In India, all the major composite applications, such as front-end modules, toilet modules, and interior panels, are preferably fabricated with glass fibers impregnated with polyester resins. Phenolic composite is also likely to witness a healthy growth during the same period.

Indian Rail Composites Market – Insights based on process type:- Based on the process type, the Indian rail composites market is segmented into Resin Infusion, Open Mold, Filament Winding, and Others. Resin infusion and open mold are likely to remain the most preferred manufacturing processes in the Indian rail composites market during the forecast period, driven by their low equipment cost, less complexity in operation, and part performance matching the current market requirements.

Indian Rail Composites Market – Insights based on region:- Based on the regions, the Indian rail composites market is further segmented into North India, South India, East India, and West India. South India and North India are the manufacturing capitals of the Indian rail industry with the presence of major rolling stock manufacturers. Both regions are likely to remain dominant over the next five years. West India currently generates an overall low demand for composite parts but is likely to grow maximum among all regions over the next five years.

The Indian rail composites market is fiercely competitive with the presence of few local players. The overall market is highly price-competitive not only among suppliers but also among competing materials. This gives an edge to the OEMs to easily switch from one player to another. It is anticipated that the excellent growth of the market may attract the global players to enter the Indian market to capture a larger chunk of the market in the coming years. Furthermore, it is also expected that the existing players may develop better technological capabilities in coming time to remain competitive in the long run.

The supply chain of this market comprises of raw material suppliers, composite part fabricators, rolling stock manufacturers, and the government. The major raw material suppliers are Owens Corning India, Goa Glass Fibre Ltd. Reichhold India Private Ltd., Satyen Polymers Pvt. Ltd., and Atul Pvt. Ltd., whereas the major composite part fabricators for the Indian rail industry are Arham Composites, Kineco Private Limited, Tech-Force Composites Pvt. Ltd., Permalli Wallace, and HCL India. The key rolling stock manufacturers are RCF Kapurthala, ICF Chennai, Chittaranjan Locomotive Works, Diesel Locomotive Works, Alstom Transport India Ltd., Bombardier Transportation India Private Ltd., and GE Transportation.

Source :– https://www.stratviewresearch.com/321/Indian-Rail-Composites-Market.html

Automotive Active Aerodynamics Market To Reach US$ 1,113.5 Million In 2023

The automotive industry is very keen to adopt technologies that can reduce carbon emission levels and meet or exceed emission norms imposed by different regulatory authorities of various countries. Aerodynamics is the third most effective technique for reducing emissions in the automotive industry after powertrain improvement and weight reduction. Active aerodynamic is the advanced aerodynamic technology, which selectively admits or restricts airflow based on real-time requirements and contributes towards the reduction in drag and thereby reducing emissions.

The auto industry has efficaciously been ushering in a new era of aerodynamic vehicles with a meticulous investment into advanced components that can address the changing business requirements in the most effective manner. All the major automakers have vigorously been incorporating active components in their most-renowned vehicle models with the purpose to improve the overall fuel efficiency of vehicles in order to address stringent government regulations, such as CAFE Standards and EU Commission on Carbon Emissions Reduction Targets.

The global automotive active aerodynamics market is likely to grow at an impressive double-digit over the next five years to reach US$ 1,113.5 million in 2023. Increasing vehicle production coupled with an increasing penetration of active aerodynamic components in newer vehicles, a rise in demand for improved aerodynamics in vehicles, and the implementation of stringent emission norms for reducing carbon emissions in the automotive industry are the major growth drivers of the automotive active aerodynamics market.

Automotive Active Aerodynamics Market – Insights based on vehicle type:- The global automotive active aerodynamics market is segmented based on vehicle type as Passenger Car, LCV, and M&HCV. The passenger car is expected to remain the growth engine of the global automotive active aerodynamics market during the forecast period. An increased dependency on active aerodynamic components to achieve better fuel efficiency and to reduce carbon emissions in cars is primarily driving the segment’s market over the next five years.

Automotive Active Aerodynamics Market – Insights based on component type:– Based on the component type, the market is segmented into Active Grille Shutter, Active Spoiler, Active Rear Wing, and Others. Active grille shutter is likely to remain the most dominant active aerodynamic component in the automotive industry during the forecast period. Over the last decade, active grille shutter has experienced a tremendous gain in various segments, especially in luxury and premium vehicles. On an average, 20% of the air in front of the vehicles goes below the hood of vehicles and reduces the aerodynamic drag. Active grille shutters perform a vital role in efficiently managing such airflow and improving aerodynamic efficiency.

There are various other active aerodynamic components currently at the development stage for mass usage. These components are also likely to mark their presence in mass-selling vehicle models in the coming years. For instance; recently launched active air dam in Ram 1500 pickup truck is the first such active aerodynamic component being launched in a serial production vehicle model.

Automotive Active Aerodynamics Market – Insights based on region:- Based on the regions, Europe is expected to remain the largest automotive active aerodynamic components market during the forecast period. Stricter emission norms of European Commission have led to a faster adoption of active aerodynamic components, especially active grille shutter, into the European vehicles. BMW AG, Audi AG, Ford Motors, Daimler AG, Lincoln, Volkswagen AG, Groupe Renault, and PSA Group are some of the key OEMs in Europe, which are increasingly adopting active aerodynamic components in some of their vehicle models.

The supply chain of this market comprises raw material suppliers, actuator suppliers, automotive active aerodynamic component manufacturers, automotive OEMs, dealers, and end-users. Some of the key raw material suppliers for automotive active aerodynamics include BASF SE, Celanese Corporation, and Lanxess AG.

The key automotive active aerodynamic component manufacturers are Rochling Group, Magna International Inc., Valeo SA, HBPO GmbH, and SRG Global. The development of new products targeting higher aerodynamic performance, the use of active aerodynamic components in unpenetrated vehicle models, regional expansion, and the formation of long-term contracts are some of the major strategies adopted by the major players in order to remain competitive in the market.

Source:– https://www.stratviewresearch.com/330/Automotive-Active-Aerodynamics-Market.html

Automotive Liftgate Market To Reach US$ 5.2 billion in 2023

The next five years for the global automotive liftgate market are going to be vigorous with sizeable growth opportunities in the entire ecosystem of the market. The market is estimated to grow at a healthy rate over the next five years to reach an estimated value of US$ 5.2 billion in 2023. Organic growth in automobile production owing to increasing disposable income and growing urbanization, increasing share of SUVs production, and increasing demand for lightweight liftgates to reduce the overall vehicle weight for achieving stringent government regulations, such as CAFÉ Standards are major growth drivers of the market.

It is estimated that approximately 638.7 million vehicles (passenger cars, LCV, and M&HCV) are likely to be produced globally during the next six years (2018-2023). This corresponds to significant growth opportunities for the market stakeholders to tap the growth potential in the coming years.

Automotive Liftgate Market – Insights based on vehicle type:- The market is segmented based on the vehicle type as Hatchback, SUV, and Others. SUV is expected to remain the growth engine of the market during the forecast period of 2018 to 2023. Increasing production of SUVs, especially in the Asia-Pacific region and high demand for comfort and space in vehicles would continue to drive the segment’s growth over the next five years.

Automotive Liftgate Market – Insights based on material type:- Based on the material type, the market is segmented as Metal Liftgates and Composite Liftgates. Metal liftgate is projected to remain more dominant over the next five years, whereas composite liftgate is likely to witness higher growth rate in the same period. Continuous shift from metal to composites is due to several factors in which the most important one is government regulations. Stringent regulations imposed by governments of many countries are putting pressure on the automakers to curb the overall vehicle weight to increase fuel efficiency or reduce emissions. Liftgates could not escape itself from such regulations and experienced a significant change in the selection of materials over the period. The auto industry is rapidly moving towards lightweight materials, such as sheet molding compound and long-fiber reinforced thermoplastics, to make the final component light in weight without sacrificing the overall liftgate performance.

Automotive Liftgate Market – Insights based on manufacturing process type:- The market is segmented based on the manufacturing process type as Stamping, Injection Molding, and Compression Molding. Stamping is expected to remain the most dominant manufacturing process over the next five years, whereas injection molding is likely to be the fastest-growing process during the same period. Injection molding offers many benefits over competing processes, such as low part cycle time, ability to manufacture complex products, recyclability, good surface finish, lightweight, and excellent strength to weight ratio. Nissan Rogue, Peugeot 308, and BMW i3 & i8 are some of the major auto models which are using injection-molded thermoplastic composite liftgate.

Automotive Liftgate Market – Insights based on region:- Based on regions, Asia-Pacific is expected to remain the largest automotive liftgate market during the forecast period. The region is also expected to experience the highest growth during the same period. Increasing automobile production coupled with increasing SUV's production share is driving the demand for liftgates in the region. China and Japan are likely to remain major markets in the region. India is likely to be the new growth engine of the region’s demand for automotive liftgates in the coming five years.

Europe is expected to remain the second largest automotive liftgate market in the same period, driven by Germany, France, and Russia. Germany is likely to maintain its lead in the region’s market in the coming five years. France and Russia are also likely to generate sizeable growth opportunities for the players in the coming years.

North America, another sizeable market, is also likely to offer favorable growth opportunities in the coming five years. The USA is likely to remain the largest market in the region, whereas Mexico is likely to be the fastest-growing market in the region in the coming five years, driven by the opening of assembly plants of all the major automakers to fulfill the growing local demand and target exports to the USA.

The supply chain of this market comprises raw material suppliers, compounders, liftgate manufacturers, distributors, automotive OEMs, and dealers. Major automotive liftgate manufacturers are Toyota Motor Corporation, General Motors, Plastic Omnium, and Magna International. Development of lightweight composite liftgates, execution of mergers & acquisitions, and formation of long-term contracts with OEMs are the key strategies adopted by the major players to gain a competitive edge in the market.

Source :– https://www.stratviewresearch.com/208/automotive-liftgate-market.html

Automotive Radiator Grille Market To Reach US$ 3,087.2 Million In 2023

The global automotive radiator grille market is projected to reach US$ 3,087.2 million in 2023 and offers healthy growth opportunities in the entire ecosystem of the market. Increasing global automobile production, rising demand for fuel-efficient vehicles, higher preference towards excellent aesthetics, increasing demand for lightweight parts, and rising automobile fleet are the major factors that the proliferating the growth of radiator grilles in the automotive industry.

Automotive Radiator Grille Market – Insights based on vehicle type:- The global automotive radiator grille market is segmented based on the vehicle type as Passenger Car, LCV (Light Commercial Vehicle) and M&HCV (Medium- & Heavy-Duty Commercial Vehicle). Passenger car is expected to remain the growth engine of the global automotive radiator grille market during the forecast period of 2018 to 2023. Increasing production of passenger cars, especially SUVs and compact cars, coupled with a higher demand for excellent aesthetics is the major driver of the segment.

Automotive Radiator Grille Market – Insights based on desigh type:- Based on the design type, the global automotive radiator grille market is segmented as Horizontal Grille, Vertical Grille, and Mesh Grille. Horizontal grille is expected to remain the most dominant design type in the global automotive radiator grille market during the forecast period of 2018 to 2023. Horizontal grille is preferred in most of the vehicle types including passenger cars and light commercial vehicles, driven by its good strength, easy maintenance, and high aesthetic value.

Automotive Radiator Grille Market – Insights based on material type:- Based on the material type, the automotive radiator grille market is segmented as metal and plastic. Plastic radiator grille is expected to remain the largest segment of the global automotive radiator grille market during the forecast period. It is also expected to witness higher growth during the same period. Stringent government regulations regarding fuel efficiency enhancements and carbon emission reductions are compelling automakers to incorporate lightweight materials into various applications of the vehicle to make the overall vehicle lightweight. Radiator grille is also not untouched with such market dynamic and has been experiencing a shift from metal to plastic materials. Plastic grille not only reduces the system weight but also offers higher performance than metal parts.

Automotive Radiator Grille Market – Insights based on process type:- Based on the process type, the automotive radiator grille market is segmented as Die Casting, Injection Molding, and Others. The injection molding process is expected to remain the most dominant and fastest-growing process type in the global automotive radiator grille market during the forecast period. Injection molding process is capable of manufacturing small-sized parts with high complexity in shapes. It is extremely suitable for mass-volume auto applications and has a very short part cycle time with very fewer scrapes.

Automotive Radiator Grille Market – Insights based on region:- Based on the region, Asia-Pacific is expected to remain the largest automotive radiator grille market during the forecast period. The region is also expected to experience the highest growth during the same period. The higher growth of automotive radiator grille in Asia-Pacific is mainly attributable to the increasing vehicle production in the region. China and India are likely to act as the growth engines of the region’s market during the forecast period.

The supply chain of this market comprises raw material suppliers, automotive radiator grille manufacturers, distributors, and automotive OEMs. The key automotive radiator grille manufacturers are Magna International, Plastic Omnium, Toyoda Gosei, SRG Global, Lacks Enterprises, Sakae Riken Kogyo Co., Ltd., Samshin Chemicals Co., Ltd., Faltec Co., Ltd. Development of active grille, regional expansion, and execution of mergers & acquisitions are the key strategies adopted by major key players to gain a competitive edge in the market.

Source:– https://stratviewresearch.com/298/Automotive-Radiator-Grille-Market.html

Aircraft Insulation Market to Grow at CAGR of 5.5% during 2019 -2024

Aircraft Insulation Market: Highlights

The Aircraft Insulation Market is likely to witness an impressive CAGR of 5.5% during the forecast period. Increasing commercial aircraft deliveries, growing demand for lightweight insulation materials and growing demand for advanced acoustic and fire-resistant materials are some of the factors that are fueling the growth of the aircraft insulation market globally. Comfort interior environment is one of the key requirements of the aircraft industry for which insulation plays a vital role. Apart from comfort, reduction in noise, anti-vibration property, and fire barrier are also some of the other key functions performed by insulation materials in an aircraft.

Aircraft Insulation Market – Insights by Type:

The market is segmented as thermal insulation, acoustic & vibration insulation, and electric insulation. Thermal insulation is likely to remain the most dominant insulation type segment of the market over the next five years. Acoustic insulation also holds a considerable share in the market. Acoustic insulation is required to attenuate noise and to provide comfort and reliability as a lot of noise is generated in an aircraft, majorly from aerodynamics and engines.

Aircraft Insulation Market – Insights by Material Type:

The market is segmented as foamed plastics, fiberglass, mineral wool, ceramic materials, and others. The foamed plastics segment dominated the aircraft insulation market. Seat cushions and mattresses are some of the key application areas of the material segment, which lead to its high dominance.

Aircraft Insulation Market – Insights by Aircraft Type:

The market is segmented as commercial aircraft, regional aircraft, general aviation, military aircraft, and helicopter. Commercial aircraft is likely to remain the largest and fastest-growing segment of the aircraft insulation market over the next five years. Increasing commercial aircraft deliveries coupled with a growing demand for safer operations and lightweight insulation materials are fueling the growth of insulation materials in the segment at a higher rate.

Aircraft Insulation Market – Insights by Region:

North America is likely to remain the most dominant market for aircraft insulation during the forecast period. The region is the hub of aircraft industry with the presence of several aircraft insulation manufacturers, aircraft OEMs, tier players, airlines, aircraft leasing companies, MRO companies, and raw material suppliers. Europe, the second largest market, is also likely to grow at a healthy rate over the next five years, driven by increasing production rates of key commercial aircraft programs of Airbus and the market entry of Irkut in the commercial aircraft segment. Military and helicopter segments are also likely to offer sizeable growth opportunities in the region in the coming five years.Asia-Pacific is estimated to witness the highest growth during the same period. Boeing estimated in its 2018-2037 outlook that approximately 16,930 commercial and regional aircraft are likely to be delivered in the next twenty years in the Asia-Pacific region, primarily driven by China, Japan, and India.

Some of the key players in the aircraft insulation market are BASF SE, Duracote Corporation, E. I. du Pont de Nemours and Company, Esterline Technologies Corporation, Evonik Industries, Rogers Corporation, Triumph Group Inc., Zodiac Aerospace, and Zotefoams PLC.

Source : https://www.stratviewresearch.com/436/Aircraft-Insulation-Market.html

Aircraft Flight Control System Market to Grow at CAGR of 3.9% during 2019 – 2024

The Aircraft Flight Control System Market: Highlights

The Aircraft Flight Control System Market is likely to witness a healthy CAGR of 3.9% during the forecast period. Increasing production rates of the fuel-efficient aircraft to support rising passenger traffic, market entry of new players in the commercial aircraft segment, advancement in flight control systems, and increasing demand for lightweight flight control systems are proliferating the growth of flight control systems in the aircraft industry. A continuous need to upgrade the old aircraft flight control system with the new technologies/systems is further substantiating the demand for flight control systems in the aircraft industry.

Aircraft Flight Control System Market – Insights by Aircraft Type:

The market is segmented as commercial aircraft, military aircraft, regional aircraft, helicopter, general aviation, and UAV. Commercial aircraft is likely to remain the largest segment of the market over the next five years, driven by a host of factors including increasing commercial aircraft deliveries, the introduction of fuel-efficient commercial aircraft, and increasing aircraft fleet size. The UAV segment is likely to grow at the highest rate over the next five years, driven by a continuous increase in defense expenditure for the development of UAVs by both the developed as well as developing economies.

Aircraft Flight Control System Market – Insights by Component Type:

The market is segmented as cockpit controls, flight control computers, actuators, and others. Flight control computers are further bifurcated into primary flight control computer and secondary flight control computer. Similarly, actuators are again divided into elevator actuators, hydraulic stabilizer actuators, aileron actuators, spoiler actuators, and trim actuators. All the component segments are likely to witness healthy growth rates over the next five years.

Aircraft Flight Control System Market – Insights by Technology Type:

The market is also segmented as fly-by-wire, hydromechanical systems, power-by-wire, and digital fly-by-wire. The fly-by-wire segment is expected to remain the growth engine over the next five years, owing to its widespread usage in the aircraft industry. Aircraft Flight Control System Market – Insights by End-User Type: The market is segmented as linefit and retrofit. The linefit segment is expected to remain the larger segment of the market during the forecast period. The segment is also likely to witness a higher growth during the same period, owing to huge order backlogs of commercial aircraft to meet rising passenger traffic across the globe.

Aircraft Flight Control System Market – Insights by Region:

North America is expected to remain the largest market for aircraft flight control systems during the forecast period. The USA is likely to remain the growth engine of the North American aircraft flight control system market as the country is the world’s manufacturing capital of the aircraft industry with the presence of many large-to small-sized aircraft manufacturers, tier players, aircraft flight control system suppliers, component manufacturers, distributors, and raw material suppliers. Asia-Pacific is likely to witness the highest growth during the same period, driven by a host of factors including an increasing demand for commercial aircraft to support rising passenger traffic, opening of assembly plants of Boeing and Airbus in China, upcoming indigenous commercial and regional aircraft (COMAC C919 and Mitsubishi MRJ), rising defense budget of China and India, and rising aircraft fleet size.

Some of the major players in the aircraft flight control system market are Honeywell International Inc., Parker Hannifin Corporation, Moog Inc., Safran S.A., Rockwell Collins, Inc., BAE Systems plc, United Technologies Corporation, Saab AB, Woodward, Inc., and The Liebherr Group. The development of advanced flight control system and formation of long-term contracts are some of the key strategies adopted by major players in order to gain a competitive edge in the market.

Source : https://www.stratviewresearch.com/435/Aircraft-Flight-Control-System-Market.html

Aircraft Health Monitoring System Market – Latest Trends, Forecast, and Opportunity Analysis

The Aircraft Health Monitoring System Market: Highlights

Health Monitoring Systems are gaining momentum in the aircraft industry as all the major aircraft OEMs are increasingly incorporating these systems into their best-selling aircraft in order to enhance the flight safety as well as to reduce MRO cost. The aircraft health aircraft monitoring system market is one of the fastest-growing systems in the aircraft industry and is likely to grow at an above average growth rate of the overall aircraft industry (7.3% vs 3.5%) over the next five years.

Aircraft Health Monitoring System Market – Insights by Aircraft Type:

The market is segmented into narrow-body aircraft, wide-body aircraft, very large body aircraft, regional aircraft, business jet, helicopter, and military aircraft. Narrow- and wide-body aircraft dominate the market and are estimated to remain the leading aircraft segments over the next five years as well. Increasing production rates of B737 and A320 including their fuel-efficient variants (A320neo and B737 max) coupled with the market entry of new players (COMAC and Irkut) are the major factors driving the overall narrow-body aircraft segment and so are the health monitoring systems for them. Similar to narrow-body aircraft, increasing production rates of B787 and A350XWB coupled with the introduction of fuel-efficient variants including B777x and A330neo are the major factors driving the demand for health monitoring systems in the wide-body aircraft segment.

Aircraft Health Monitoring System Market – Insights by Installation Type:

The AHMS market is segmented as onboard and on-the-ground. It is estimated that the onboard segment is likely to depict a higher growth during the forecast period, propelled by the installation of different health monitoring system components, such as sensors, communication systems, and flight data management systems, with an aim to provide an increased passenger safety and reduce MRO cost.

Aircraft Health Monitoring System Market – Insights by Region:

North America is expected to remain the largest market for aircraft health monitoring systems in the coming five years, whereas Asia-Pacific is likely to witness the highest growth during the same period. The USA is the growth engine of the North American market. Similarly, China, Japan, and India are the key sources of growth in the Asia-Pacific’s aircraft health monitoring system market. Substantial growth in air passenger and freight traffic in China and India are compelling aircraft manufacturers and tier players to open their manufacturing plants in the region. This, in turn, will create a healthy demand for aircraft health monitoring systems in Asia-Pacific during the forecast period.

Some of the major players in the AHMS market are Airbus S.A.S., The Boeing Company, United Technologies Corporation, Honeywell International Inc., General Electric Company, Rockwell Collins, Inc., Meggitt PLC, Rolls-Royce Holdings PLC, Safran S.A., Air France Industries KLM Engineering & Maintenance, and Lufthansa Technik AG. These major players are likely to remain the most dominant ones over the next five years as well. Several efforts are being made by these players to remain competitive and to quickly gain more shares in the market. Some of which are a regional expansion, execution of mergers & acquisitions and joint ventures, and advancement in technologies.

Source : https://www.stratviewresearch.com/434/Aircraft-Health-Monitoring-System-Market.html

Automotive Engine Oil Pan Market To To Reach US$ 2,161.2 Million In 2023

The global automotive engine oil pan market is projected to grow at a healthy rate over the next five years to reach US$ 2,161.2 million in 2023. Increasing global automotive production, introduction of stringent regulations regarding fuel efficiency and carbon emissions, and continuous replacement of traditional oil pans with lightweight composite oil pans are the major growth drivers of the global automotive engine oil pan market.

Automotive Engine Oil Pan Market – Insights based on vehicle type:- The global automotive engine oil pan market is segmented based on the vehicle type as Passenger Car, LCV (Light Commercial Vehicle) and M&HCV (Medium- and Heavy-Duty Commercial Vehicle). The passenger car is expected to remain the growth engine of the automotive engine oil pan market during the forecast period of 2018 to 2023. Increasing production of hatchbacks and SUVs especially in emerging economies, such as China and India, is the key factor, propelling the demand for engine oil pans in the segment.

Automotive Engine Oil Pan Market – Insights based on product type:- Based on the product type, the global automotive engine oil pan market is segmented as Structural Engine Oil Pan and Non-Structural Engine Oil Pan. Structural oil pan is expected to remain the most dominant product type in the market during the forecast period of 2018 to 2023. However, non-structural engine oil pan is likely to grow at a faster growth rate during the same period.

Automotive Engine Oil Pan Market – Insights based on material type:- Based on the material type, the automotive engine oil pan market is segmented as Aluminum, Steel, and Composites. Aluminum is expected to remain the most dominant material type in the global automotive engine oil pan market during the forecast period. However, composite is expected to witness the highest growth during the same period, owing to an increasing demand for lightweight and high-performance engine oil pans in the industry.

Automotive Engine Oil Pan Market – Insights based on region:- Based on regions, Asia-Pacific is expected to remain the largest automotive engine oil pan market during the forecast period. The region is also expected to experience a healthy growth during the same period. High annual automobile production is primarily driving the demand for engine oil pans in the region. China is expected to maintain its dominance in the Asia-Pacific’s market over the next five years. The country is also the largest global market. Europe is expected to remain the second largest automotive engine oil pan market during the same period.

The supply chain of this market comprises raw material suppliers, automotive engine oil pan manufacturers, distributors, automotive OEMs, and dealers. Major automotive engine oil pan manufacturers in the market are MAHLE GmbH; Dana Incorporated; Eaton Corporation Plc; ElringKlinger AG; Nemak, S.A.B. de C.V.; and Polytec Group. Development of optimized engine oil pan, regional expansion, and mergers & acquisitions are the key strategies adopted by major key players to gain a competitive edge in the market.

Source:– https://stratviewresearch.com/301/Automotive-Engine-Oil-Pan-Market.html