Will adjust the huge salary of the “boss” lottery?

This work will consider whether the salary of the leaders of Tien Giang Lottery One Member Limited Company is unique or popular in order to have the adjustment accordingly.

If the difference is too high compared to the lives of local people, especially in places where people's lives are still difficult, it is clearly not good.

According to regulations, the salary of management leaders such as group chairman, director, general director in state-owned enterprises is up to 36 million dong / month.

In case the production and business activities are efficient and profitable, the managers may increase by 1.5 times but not exceed VND 54 million / month.

After paying taxes and investing in production, their profits are deducted from the bonus and welfare fund, but up to an average of 3 months' salary.

However, according to the leadership of the Ministry of Labor, Invalids and Social Affairs, the average income of managers of Tien Giang Lottery Company is VND 730 million a year due to its efficient business. With such a huge income it shows that this is due to implementation, not by policy. It is necessary to conduct bar and inspection.

What you need for reference: Satta king

However, in discussions with Tuoi Tre, the Department of Finance of Banks and Financial Institutions – Ministry of Finance said that through monitoring the salary and bonuses of some lottery businesses are done in accordance with the Decree. No. 51 of 2013 and Circular No. 19/2013 of the Ministry of Labor, Invalids and Social Affairs on the regime of salary, remuneration, bonus ...

For the public to understand objectively, it is necessary to separate the income in detail. As the total income of leaders of Tien Giang lottery company is 60 million VND / month, the specific salary, per diem, part-time allowance, bonus… is how much.

The representative of the Ministry of Finance also further clarified the fact that the lottery companies' operations are very effective, contributing greatly to the local budget revenues, especially lottery companies in the South.

The revenue of the whole lottery industry nationwide in 2013 earned 58,629 billion VND, of which 17,600 billion VND was paid to the state budget; 2014 earned over 63,000 billion VND, contributed more than 20,100 trillion VND to the state budget.

In 2015, too, although there are no official statistics, the revenue of the whole lottery industry also increased by more than 10% compared to 2014, of which 90% of the revenue was contributed by lottery enterprises in the southern provinces.

As a rule, the entire amount paid to the budget each year about 20 trillion VND is only invested in health, education and local social security programs.

Google again let Apple “smoke” when integrating realistic images on Google Maps

The AR mode in Google Maps is now much better, while Apple Maps is still frozen in place.

Augmented reality promises to be a key development for Apple a few years ago. At least this was suggested by Tim Cook and his team, who were quite active in promoting the technology through speeches. Even so, Apple has to admit that Google has gone a lot further in the development of this technology, though.

Last year, Google introduced an enhanced AR mode for the mobile version of Google Maps. After many additions, the Google navigation map can now plot the route visually and help users follow directions by opening the camera on the smartphone to record their surroundings as well as give instructions based on things. fact ...

In addition, the AR mode has received support for virtual landmarks, allowing users to understand the objects that surround themselves.

How does Google recognize objects?

AR mode not only recognizes any but only recognizes fixed obstacles such as walls, tall buildings or iconic landmarks. The uniqueness of this technology lies in the fact that the user can point the camera towards the horizon, and if the camera sees a distant object that they can see, the AI ​​will certainly recognize the subject as well and mark it with a virtual pointer with the name and address given to it. The only regret is that while this regime only works in 25 countries around the world, Vietnam is not among them.

All you need to look for: buy google reviews

The AR mode in Google Maps allows you to recognize objects as fixed obstacles even from a distance

With the help of landmarks in augmented reality, it also becomes more convenient to navigate in dense urban areas in megacities. As an example of using the new AR mode function, Google cited its own algorithm for locating the Empire State Building in New York.

Normally, with a bottom-up view, it would be difficult for passers-by to distinguish one skyscraper from another, otherwise try to raise their head and distinguish the characteristic apex of each building. Using Google Maps, based on information about the user's position, direction of movement, and objects that the camera can see, it can easily understand what kind of skyscraper it is without raising your head. go to heaven like people used to

Find people using Google Maps

In the near future, Google plans to further expand the AR mode's capabilities in Google Maps, adding the ability to find friends who have shared their locations.

When you receive a point on the map from a loved one, you can share your location with that person. If Live View is turned on, you can see in real time the distance between you and the direction you need to follow to get to that point. This feature will be very practical and worth the wait.

Google has taught Google Maps to track people, marked with AR technology

This is an innovation that is even more interesting than one already in Google Maps. The fact is that many users who have their loved one share their location don't know where they are and in which direction they are moving, since they cannot figure out the direction of the map and the legend.

With the help of augmented reality, users simply fire up the camera and see if a loved one changes direction and how close they are in real time.

How to take pictures of beautiful products at home

You don't have to have an expensive studio and camera to create your own high-quality product shots. All you need is an electric camera, a studio you can set up yourself and a photo editing app to perfect a great product photo!

1. Select a location to shoot

You can take product pictures almost anywhere, but you need to have space for it to function as a studio. Look for a room with plenty of natural light if you are not planning on setting up lighting. Make sure the space is large enough for you to manage enough for the size of the product.

Use a room with a wall by the window so you can use natural light if you want to shoot with natural light.

If you choose to shoot outdoors, find a space that is not too windy and does not have a lot of moving shade.

2. Use natural light

Natural light refers to sunlight and has a much softer range of light than artificial light. Some products are great for shooting in natural light.

If a product is for external use, then use natural light.

Products worn on the body such as clothing or jewelry should be better captured in natural light.

To emphasize the product or its surroundings, use natural light for a more realistic feel.

3. Artificial light controls the light more.

Artificial light includes light bulbs or even candles to create a smaller but more concentrated light on the surface of the product. Use artificial light to bring out the details of the product.

For example, if you want to sharpen the texture of a product such as jewelry, artificial lighting can accentuate the surface.

Do not mix artificial and natural lighting in your photos.

Top reputable service you do not know: product photography

4. Turn off all other lights in the room

You don't want any other light to invade your studio. They can degrade the light quality and create unsightly shadows on the product you are trying to capture.

If you are not planning on using any natural light, close the curtains on the windows. Use blinds to prevent any outdoor entry.

5. Select a table to use as a shooting area

Use a simple folding table to provide a flat and stable surface for product photography. If you plan to use natural light, place a table near a window.

The closer you are to the window and the larger the window, the softer the natural light will be.

Use a standard folding table about 24 -27 inches (61-69 cm) wide to give you enough space to work.

6. A white paper as the background for the image

Laying down a piece of white paper creates a C-shaped curve. This gives an infinity effect to the background without creases in the background. Use tongs to fix the piece of paper.

How to take a product

1. Use your phone to shoot

The easiest way to take beautiful professional-quality home photos is to use electricity like an iPhone 8, Samsung Galaxy S7, or Google Pixel. The quality and resolution of the camera is high and you don't have to invest in a professional DSLR.

2. Select the DSLR to take product photo

DSLRs give you more creative control, but they can be more difficult to use if you're just starting out. They have a manual capture mode, which means you can have more options and settings

DSLR cameras also allow you to use different lenses.

Entry-level (basic) DSLR cameras cost around $ 500- $ 600.

3. Set up the tripod of the camera

A tripod will give you more evenly good product shots. They're also adjustable, inexpensive, and super easy to use. Invest in a tripod if you want to take better product shots.

4. Shoot with phone should be vertical to create depth of image

beautiful product capture

Many phones have an image setting called portrait mode that blurs the background so that the subject of the picture is clear and emphasized on the product. It also makes the photo look more professional and attractive.

If your phone doesn't have portrait mode, you can download an app like FabF Focus, PortraitCam or AfterF Focus, which will create a portrait mode effect.

5. Take multiple photos from different angles

By taking multiple photos from different angles. You can see which angle the product is most suitable for.

The last thing if you want to take good product photos, you practice regularly, knowing which one is right at the angle of the shot and how the lighting is.

How to manually repair the overlock machine when you encounter basic errors

If you often experience thread tangles, thread breakage, nose removal, or needle breakage, but you do not know how to quickly fix, take a long time and delay the completion of the product. Hope this article will help you in sewing.

Conventional wringers have 4 types:

3 thread extractor machine: 1 needle, 2 hook

4 thread extractor machine: 2 needles, 2 hooks

Overlock machine with 5 threads: 2 needles, 3 hooks

6 thread extractor machine: 3 needles, 3 hooks

Causes of thread breakage, nose removal, needle breakage

The thread tension and strength must ensure that the index matches the needle count.

All lines only have the ball, the underside of the coin must be ball

If the needle thread is broken, check whether the needle is bent or bent, and whether or not the needle thread is brushed against the presser foot.

The front hook ensures gloss and head end, because the hook catches on the thread line, the needle also causes thread breakage. When the needle is down, take the back hook if the spool is too large, it also causes thread breakage.

You can find: best portable sewing machine

Causes of front hook thread breakage: Check whether the back hook is shiny, scratched, scratched, or punctured on the thread.

The cause of the following hook thread breakage: Check whether the needle is inserted into the rear hook thread, whether there is heavy weight on the back of the rear hook.

Check whether the front hook has kicked the needle missing part or the needle is so heavily pressed, so the back hook is behind, rubbing against the eight needle supports or presser foot.

Fabric pushers and cloth clippers

The guillotine must ensure correct and sharp mounting.

In case of wide margin correction: Do not adjust the knife below the blade part of the needle support plate.

If a large shearing product is required, it is up to the product to adjust the narrow width of the march.

The compression of presser foot and serrated must be harmonious: When thick fabric is pieced together, it is necessary to raise serrated, when elastic, presser foot heavily.

Note :

If the product has elasticity, adjust the thread level, the bottom surface of the presser must ensure gloss. Usually the 3 thread and 4 thread extractor are the same.

The 5-thread and 6-thread spinning machine is normal, the sewing thread looks like the 3-thread or 4-thread spinning machine.

When machine 5 only removes the shrimp bed (slope), it can be used as a 3-thread spin machine.

When machine 6 only removes 2 chain links (shrimp bed, slope), we can use it as 4-thread machine. When adjusting the 5 and 6 thread machines, the machine has 5 and 6 thread threads, 1 upper and 1 lower hook runs out to the chain link thread (shrimp bed, slope), the lower hook has thread digging fruit. If the peach is incorrectly adjusted, the nose will still be removed and the thread is broken.

Adjust peach thread jerky

Use the nape of the needle as a mold.

When hook back injury, only start jerking from 2-3mm. If you want to chop only, when piecing depends on the nature of the product, you can adjust the peach thread later.

Stretchy knit fabric can adjust the peach goose more thread, the hook reach with the needle earlier than the hook of the wring line.

Change the procession

When replacing the 5-thread or 6-thread spin extractor circuit breaker: If the machine can rotate the needle cylinder, turn the needle post into the correct needle hole, and the wrench cannot rotate the needle post, turn the needle holder into the correct needle support hole.

With 5-thread machine, 2 needles are in the correct needle support hole, when adjusting a large distance, if the hook of the slope does not reach the correct level of the needle missing part, open the upper cover to adjust the screw accordingly.

Instructions to identify printer errors through indicator lights

Currently, there are many brands of printers on the market, and each type of printer has its own advantages and disadvantages. Although now you are using a printer brand of high-end or low-end? Which brand are you using? Or are you using an old printer, a new one, an expensive one or a cheap one?… You still can't avoid some unexpected errors during printing.

Therefore, the main topic of this article that I want to mention is Teach people how to recognize some common errors on the printer through bright lights. Please read for more detailed information and more specific in the article below.

 

Introduction and How to identify printer errors via indicator lights

Next, Blogmayin.com will guide readers to identify the errors occurring on the printer through the indicator light.

How you find good products: best copier machine

Instructions to identify printer errors through the indicator light

1. The printer error indicates two red lights that are flashing continuously

CASE 1: The printer indicates 1 light is flashing and 1 light does not light

It can be due to one of the following reasons:

– You may have pressed the Cancel button during printing

 

– The paper tray is out of paper or the machine has a jam

– Your printer is in the data receiving mode, then the green light will blink slowly

Direction to fix printer errors:

– If you press the Cancel button to cancel the print job, press the Resume button to re-print the job.

– If the paper tray is empty, add paper to the tray

– If the printer has a jam, to avoid damaging the printer drum, avoid pulling the paper directly out of the printer. Remove it instead

the toner cartridge comes out of the printer and then pulls out the jammed paper before repeating the cartridge as before.

CASE 2: The printer fails to start and the printer blinks two red lights continuously alternating

The printer does not start, two red lights blink continuously alternately => Your printer has been overflowing with memory leading to the printer hang, need to restart and use the printer reset software.

The printer starts up normally, but at the end of the period it stops at the original output position and indicates 2 red lights flashing alternately (Not flashing at the same time) => Printer memory has reached the level of nearly overflowing but not enough to overflow, need to download printer blank reset software.

The printer starts up normally, but at the end of the period, it stops at the position to remove the ink and the 2 red lights indicate red, this is the reading error.

With optical or printer vision errors, you need to bring them to a place to repair the printer before you can fix it.

CASE 3: Printer starts up and then runs over and over again and two flashes continuously at the same time

Possible causes: Printer has a motor jam; The optical eye (reading eye) of the device is damaged; The tape measure is damaged or dirty; The ink nozzles are damaged; Printer has faulty mainboard; The ink line is entangled when the machine is started, etc.

How to fix: With this error is mainly caused by a hardware failure, you need to remove the printer and clean it. If the parts are damaged, they will need to be replaced.

2. The ink light is lit or flashing

– For printers that have not been upgraded yet, are using ICs, you perform manual ink reset:

1. Press the Ink button on the printer, the nozzles will move to the right square (for Epson XP 200 nozzles will be in the middle)

 

2. In this position you can open the nozzle cover.

 

3. Press the white ink reset button located on the IC several times, then close the nozzle cover.

4. Press the Ink button on the printer to return the ink nozzles to the original position, the printer will automatically reset the ink and turn off the ink indicator (if the printer still indicates the ink light after several times, contact the technician. For advice you may have other printer errors).

– For printers that have upgraded, attach the ink set continuously, you should use the software to reset the ink.

3. The paper light lights up when printing the job

– The printer you are using may be out of paper, for the printer to work as usual, everyone should add more paper to the tray and press the paper button to continue printing.

– It is possible that the paper can not be received by the reading eye.

The reason may be that the reading eye is dirty, faulty or touched, you use decal paper so the eyes cannot read the paper, it may also be caused by the cable, the paper loader.

– Load paper is worn, dust .... Cannot stick to the paper to pull it down, causing an error, please contact technical assistance

4. Paper Light – Ink Light – The power light blinks non-cyclically when the printer is started

– The printer cover is not closed or the output tray is incorrectly positioned.

– Close the printer cover. If you use the CD printing function, remove the paper support tray from the printer, let the printer finish booting, insert the paper tray into the CD printing position before printing, and insert the CD tray.

5. The paper light and the ink light blink at the same time

General error, can be caused by a fault of the operator unit, the cable, or the system main. This is an error related to the printer's internal parts, which may have to be replaced before it can be fixed.

Tips to reduce fuel consumption for a 2-stroke engine lawn mower?

In the time when gasoline prices are increasing, farmers are more and more interested in finding ways to reduce fuel consumption for their machines and equipment. Typically lawn mowers in general and motor lawnmowers 2 in particular because these are the equipment that are frequently used.

This article will guide users with a number of simple steps to minimize fuel consumption, thereby helping farmers save production costs, not only bring economic benefits but also also helps to partially protect the surrounding environment.

For the gasoline filter

When the engine 2 mower is used for a long time, the fuel filter will quickly become dirty because the gas supply at retail gas stations is often not clean. So the refueling, passing the fuel filter into the fuel tank (also known as carburetor) before entering the engine will significantly affect the engine capacity, thereby making the machine work more inert and not load each. when we squeeze the gas.

Therefore, gasoline filters need to be cleaned periodically and it is best to clean them periodically once a week as recommended by the manufacturers.

The cleaning operation is also simple by using the hook to hook them out of the fuel tank, then manually remove them from the gas hose. At this point we can proceed to clean by blowing back the gas line (preferably using a high pressure air compressor). Thus, it only takes about 5 minutes for each cleaning that we can ensure the engine capacity, the machine works well and minimize fuel consumption.

 

2. For gas tank (also called carburetor)

This is a very important detail of the 2-stroke engine lawn mower that determines the power of the machine and the fuel loss. If used incorrectly, either it reduces the power of the engine or increases the power of the engine abnormally, thus causing extreme fuel consumption.

List of top rated lawn mowers: best commercial zero turn mower on the market

 

After a period of dirty refueling, the holes of the gas line show the phenomenon of scale, then less gasoline will enter. Or vice versa, too much gasoline goes in because the needles are not working properly for a long time. Therefore, we see the need for periodic cleaning of gas holes as well as periodic inspection of gasoline needles and pump membranes to ensure the most stable and most fuel efficient machine.

The cleaning proceeds as follows: remove the fuel tank from the engine, clean the outside. Then proceed to disassemble each detail. Pay attention to the right hole of the gas line and the fuel needle when performing disassembly and assembly. For a gas hole, use a single core of the bicycle or motorcycle brake cable to punch in the hole and clean them. Particularly for the pump diaphragm and the needle, great care should be taken not to affect them.

After cleaning with oil or gasoline, blow the air with the compressor to be clean and then proceed to assemble it.

 

3. For the wind filter

The air filter has the function of providing the engine with a clean and sufficient amount of air for the combustion process, so when the air filter is dirty, it will prevent the amount of wind going inside, reducing the power of the engine.

At this time, the air filter will be like a gas filter, there is a stalling phenomenon and the engine is not being squeezed. The more we squeeze the gas, the more fuel comes in, but the engine does not burn it all and releases it to the outside environment, thus wasting fuel and affecting the environment.

The air filter can be further positioned to extend the life of the unit and be easy to clean in minutes – simply pat the filter's suction line back on. If there are cracks or slight damage to the filter, you should also replace the filter with a new one, not economically but use more or refurbish the filter because the filter price is relatively cheap.

>> How to identify genuine Honda lawn mowers and counterfeit products

 

4. For Spark Plugs

If detecting factors influencing spark plugs such as incorrect spark plug cables, worn electrodes, poor contact, insufficient current, etc., we should replace the spark plugs with the correct type.

Because the spark generated by the spark plug is not qualified, the mixture of air, gasoline and oil cannot be burned. At that time, capacity will be reduced and this mixture will be discharged into polluting environment.

Particularly in case the spark plugs are still usable, but just because the electrodes are too dirty, do not ignite well, they can still be cleaned with a iron or brush.

 

The above are specific instructions on how to check the parts of a 2-stroke lawn mower and detailed simple operations on how to clean them, hoping to help farmers in reducing fuel consumption effectively for the line. this machine.

How to increase wifi waves with beer cans

There are many ways to increase Wifi signal effectively and quickly. With only this self-made beer cans wifi booster antenna, your Wifi column is always much more stable and powerful than before.

Along with the development of information technology, signal transmission devices are increasingly reducing wires and transmitting signals to wireless networks that are of great interest to many people. However, the simple transmitters have quite small antennas and the directional ability is not good, so many families today who want to have wifi coverage on a house of about 4 floors still have to use relay devices. (repeater) or use 2 transmitters.

The problem is quite painful, but the solution is very simple. With just 1 can of soft drink and about 10 minutes of processing, you can help the wifi wave to travel further and have the ability to direct the main broadcast for the wifi.

Increase wifi waves with beer cans

When I heard about using beer cans to help increase wifi signal, it was very strange, right? These things are extremely effective because you should know that all objects with a metal surface will directly affect the wifi waves. To improve the wifi wave, you can create wave-oriented pans made from beer cans, soft drinks ...

Products suitable for families: Best router for multiple devices

Increase wifi waves with beer cans

The need of using the internet of people is becoming more and more essential and not all Router devices can meet the wide range of wifi transmissions throughout the home of owners. It's so bad when using wifi, the signal is fluttering, there is always network drop ... This problem makes users very uncomfortable, so we will find all measures to improve the situation. In addition to the use of transmitters and wifi signal amplifiers, now with only 1 can of beer and about 10 minutes of implementation you will have a fast, efficient, improved transmission line. wifi as well as wifi broadcasting direction to best suit.

Prepare items to increase waves with beer cans

Simple, easy to find and not too good of a cost. You can do this yourself and or if they are already in your home:

Drag

Beer cans, soft drinks

Paper knives

2-sided adhesive

Proceed

Step 1: Remove the cans from the can, then wash the can thoroughly with water, remove any impurities and water remaining in the can.

Remove the lid snatch from the can

Step 2: Use a paper knife to cut the bottom of the can carefully to avoid crushing the can. The bottom part is removed.

Use a paper knife to cut the bottom of the can carefully

Step 3: Cut the long mouth as well as the bottom part, but not completely cut, leaving the hole about 2 to 3 cm. (Do not let the face of the can cut, which means the mouth of the can remains attached to the body)

Cut off the long mouth as well as the bottom

Step 4: Use scissors to cut the body of the can in half in the direction of the line with even distance from the point attached to the mouth of the can. Then widen the body of the can, now you will see it as a one-way parabola.

Use scissors to cut the body of the can centrally in the direction of the line at a regular distance from the point attached to the mouth

Then widen the body of the can, now you will see it as a one-way parabola

Step 5: Use 2-sided glue to paste the can mouth into your Router. Remember that the hole of the can is placed in the antenna. Then fix the direction of the parabola to the direction of the wifi transmitter.

Then widen the body of the can, now you will see it as a one-way parabola

Simply create a receiver pan like a parabolic receiver, then point to the Wifi source and the device that needs to use wifi will be in front of the homemade pan. This will quickly reach where you want them to go. This will improve the transmission speed, the direction of the wave direction so you have a better internet experience.

Note: For Router devices with 2 antennas, you should also create another homemade parabola to increase the wave direction and help the waves reach further. Places you often use wifi such as seats, beds, desks ... please watch the waves to ensure that when you arrive at that location, the internet experience will be more enjoyable. Or if you want to direct the waves upstairs, just adjust the direction of this homemade parabolic with the antenna up and fixed the wave direction.